October 06, 2017

Bus coupler for PROFINET and EtherCAT

Bus coupler Part-No. 778000.1301 & 778000.1401

LÜTZE is expanding its LCOS and LOCC-Box series with two new bus couplers for PROFINET and EtherCAT.

The two LÜTZE bus couplers connect the PROFINET bus and EtherCAT bus to the peripheral modules and facilitate simple communication at up to 100 Mbit/s in field bus and network systems.

The new LÜTZE bus couplers communicate internally via CAN-Open ISO 11898-1. Communication with external LOCC-Boxes on the BUS is configured with a 2-pole design. Up to 64 modules can be installed on the bus couplers. In operation with external LOCC-Boxes, up to a maximum of 128 bus couplers can be installed. Loads are connected via pluggable 2-pole spring terminals (AWG 24- AWG 12). The parameterization is performed using the free LÜTZE Windows software LOCC-Pads.

The status indications are visualized by LEDs for "Power", "Maintenance", "Error" and "BC-Error". These two new bus couplers comply with the standards UL 61010, EN 61131-2, EN 55016, EN 61000-4-2/3/4/5/6, EN 55011, EN60721-3-3, EN 60068-2-1-42. The approvals for UL and GL are pending.

Number of characters: 1.387

Press contact

Wolfram Hofelich
Friedrich Lütze GmbH
Bruckwiesenstr. 17-19
71384 Weinstadt, Germany
info(at)luetze.de
Tel +49 7151 6053-0
Fax +49 7151 6053-277

Press download